Midwest 60" General Shop Tool Cabinet Tools Only

Description

Complete set of tools for your general shop needs.

1 Angle Vise
2 Backsaw, 12TPI, 14"
5 Bar Clamp Spreader, 24"
2 Bench Plane
1 Bits, Spade, 6", 6 pc.
20 Blade, Coping Saw, 15T, 4 pc.
3 Blade, Hacksaw, 12" x 24T
2 Block Plane, Low Angle
2 Caliper, Dial, 6"
1 Carpenter's Square, 12" x 1-1/2"
4 C-Clamp, 4"
6 C-Clamp, 6"
1 Center Drill & Countersink, 1/8"
1 Center Drill & Countersink, 3/16"
1 Center Drill & Countersink, 3/64"
1 Center Drill & Countersink, 5/64"
1 Center Drill & Countersink, 7/32"
1 Center Drill & Countersink, 7/64"
3 Center Gauge
1 Chisel, 1"
1 Chisel, 7/8"
2 Chisel, Wood, 1"
2 Chisel, Wood, 1/2"
2 Chisel, Wood, 1/4"
2 Chisel, Wood, 3/4"
2 Chisel, Wood, 3/8"
3 Clamp, Handscrew, 6"
3 Clamp, Handscrew, 8"
1 Cold Chisel, 1/2"
1 Cold Chisel, 3/4"
1 Cold Chisel, 3/8"
1 Countersink, 1/2"
1 Divider, Wing, 6"
1 Drill Bit Set, 115 pc.
1 Drill Gauge
10 File Card, #20
27 File Handle, T6
2 File, 2nd cut, Round, 10"
2 File, Bastard, Flat, 10"
2 File, Bastard, Half Round, 10"
2 File, Bastard, Mill, 10"
2 File, Bastard, Round, 10"
1 File, Bastard, Square, 10"
2 File, Mill, 2nd Cut, 10"
2 File, Mill, Smooth Cut, 10"
2 File, Smooth, Flat, 10"
2 File, Smooth, Half Round, 10"
2 File, Smooth, Round, 10"
2 Gauge, Mortise & Marking, 8"
5 Hacksaw Blade, 12" x 18T
3 Hacksaw, Fast Tension, 12"
3 Hammer, Ball Peen, 16 oz.
3 Hammer, Ball Peen, 24 oz.
2 Hammer, Cross Peen, 3 lb.
4 Hammer, Curve Claw
4 Hammer, Rip Claw
1 Hand Seamer
4 Handsaw, 12TPI, 24"
1 Hex Key Set, Fractional, 18 pc.
4 Jack Plane
1 Level, Aluminum, Magnetic, 24"
3 Nail Set, 3 pc.
3 Nail Set, 3/32"
1 Nippers, Heavy Duty, 10"
1 Oil Stone, 2" x 1" x 6"
2 Outside, Micrometer, 0-1"
3 Pistol Oiler
8 Pliers, Slip Joint, 6"
4 Pliers, Slip Joint, 8"
1 Punch, Center, 1/2"
1 Punch, Center, 3/8"
2 Rafter, Square, Aluminum
3 Rasp, Bastard, Half Round, 10"
3 Rasp, Wood, Flat, 10"
2 Rivet Tool Kit
2 Rubber Mallet, 16 oz.
1 Rule, Circumference, 3'
12 Rule, Steel, 12"
3 Rule, Steel, 24"
1 Rule, Steel, 3'
6 Rule, Steel, 6"
6 Saw, Coping, 6-3/8"
2 Saw, Jab
3 Scraper Set With Burnisher
6 Scratch Awl
1 Screwdriver, Phillips, #0 x 2-3/4"
2 Screwdriver, Phillips, #1 x 3"
2 Screwdriver, Phillips, #2 x 4"
1 Screwdriver, Phillips, #3 x 6"
1 Screwdriver, Standard, 3/8" x 12"
2 Screwdriver, Standard, 4"
2 Screwdriver, Standard, 6"
2 Screwdriver, Standard, 8"
1 Shave Spoke
2 Slip Stone, Medium Grit
3 Snip, Aviation, Straight
3 Snips, Aviation, Left
3 Snips, Aviation, Right
1 Soldering Iron, 100W
6 Square, Bamboo Try, 8"
1 Square, Combination
1 Tap & Die Set, SAE, 40 pc.
2 T-Bevel, Sliding, 10"
1 Wheel Dresser, #0
1 Wood Carving Tool Set, 6 pc.
2 Wrench, Adjustable, 10"
2 Wrench, Adjustable, 12"
3 Wrench, Adjustable, 8"
1 Wrench, Pipe, 10"
1 Wrench, Pipe, 14"
1 Wrench, Pipe, 18"