MakerBot PLA Filament, 1.75mm Large Spool, True Color, Blue

SKU: W512859 MP05776
Write a Review
W512859 MP05776
Product Type:

Frequently Bought Together

Please choose options for all selected products


MakerBot  MakerBot PLA filament is the best and most consistent filament for MakerBot Desktop 3D Printers. PLA filament is a bioplastic derived from corn. It's guaranteed not to have any heavy metals, phthalates or BPA.

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on compatible MakerBot 3D Printers to verify that the filament will perform every feature that MakerBot Makerware software offers and reliably slice and print every type of printing.

If you're new to 3D printing, PLA filament is a good material to start with because it’s easy to use and performs well on most prints. Filament adheres well to acrylic and to blue painter’s tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. Store filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances. Be sure your build plate is level, clean and oil-free before printing.


Glass temp: 60~65° c (140~149° f)
Melting temp: 150~160° c (302~320° f)
Nozzle temp: 230° c (446° f)

Dimensions & Weights

Spool diameter: 25.0 cm (9.84 in)
Spool width: 4 cm (1.57 in)
Spool hub hole: 5.08 cm (2 in)
Diameter: 1.75 mm
Net weight: 0.9 kg (2.0 lb)

Color: Blue

PLA Large Spool filament is compatible for use with MakerBot Replicator 2, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

Color shown are for reference only.


  • View the Safety Data Sheet (SDS) View the Safety Data Sheet (SDS) Download