JET 14" Large Spindle Bore Lathe

SKU: W485699 GH-1440ZX
Write a Review
W485699 GH-1440ZX
Ships direct from manufacturer. Lead times may vary.
lead, cadmium ^^ lead, cadmium, phthalates

Frequently Bought Together

Please choose options for all selected products

  • Choose Options


Due to special pricing available exclusively to our school customers, this item is not available for purchase to our non-school customers at the price listed. Every effort will be made to sell this item at the lowest available price to our non-school customers. Please call us at (800) 831-5904 or email us at

3-1/8" bore spindle is supported by 2 tapered and 1 ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametral and module pitch threads with no change gears required.

  • Full-length splash guard & coolant return
  • 1-shot lubrication carriage & Turcite-B on bed sliding surfaces
  • T-slotted compound slide w/4-way tool post
  • 1-piece cast iron base absorbs vibration allowing heavier cuts
  • High-quality ANSI Class 50 wear-resistant cast iron bed ways are hardened & ground
  • Removable gap allows up to 23-5/8" dia. Work
  • 5-position automatic carriage stop increases productivity
  • Centrally-located controls w/jog button
  • Chrome control levers, dials & knobs
  • Articulating halogen work lamp
  • ISO 9001 certified
  • Fully-integrated coolant system
  • Large, easy-to-use foot brake

230/460V, 7-1/2 HP, 3 phase.
Swing: over bed 14", over cross slide 7-5/8", through gap 23-5/8".
Length of gap 12-1/4".
Distance between centers 40".
Headstock: hole through spindle 3-1/8", spindle nose D1-8, taper in spindle nose MT-5 to MT-7, spindle speed range (12 speeds) 42-1,800 rpm.
Gearbox: longitudinal & cross feeds 122, longitudinal feed range 0.0015" to 0.0913"/rev., cross feeds range 0.0006" to 0.0365"/rev., 61 inch threads, inch thread range 1-5/8 to 72, 24 metric threads, metric thread range 0.05 to 20mm.
Compound & carriage: 4-way tool post, max. tool size 1" x 1", compound slide travel 5-1/8", cross slide travel 9", carriage travel 35".
Tailstock: spindle travel 5", taper MT-4.
Follow rest capacities 1/2" to 3-1/2".
Steady rest capacities 3/8" to 7".
Bed 13-3/8"W.
Tool size 97-1/2"L x 40"W x 46-7/8"H.
Weight 5,187 lbs.

Includes Acu-Rite Digital Readout, 10" 3-jaw chuck w/top reversing jaws, 12" 4-jaw chuck, 12" face plate, follow rest, large capacity steady rest, coolant system, splash guard & coolant return, foot brake, work lamp, threading dial, mounting pads & levelers, spindle sleeve (MT-7 to MT-5), dead & live centers, toolbox w/adjusting tools.

Please specify voltage. 230V will be sent if not specified.


  • California Residents WARNING: This product can expose you to chemicals including lead, cadmium , which is [are] known to the State of California to cause cancer, and lead, cadmium, phthalates, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to
  • California Residents