Diversified Spaces 60" Electricity Tool Cabinet with Tools

Description

Cabinet is constructed of solid maple and maple veneers. Upper cabinet doors, side and rear panels are lined with 1/4" pegboard. Lower cabinet features 1 fixed and 2 adjustable 1" plywood shelves. Upper and lower doors include locks. Earth friendly UV finish. Shipped set up. 

Overall size 60"W x 22"D x 84"H.

3 Analog Multimeter
1 Bolt Cutter
1 Cable Cutter
3 Cable Ripper/Wire Gauge
6 C-Clamp, 1-7/8"
6 C-Clamp, 3"
6 C-Clamp, 4"
1 Chisel Set, Wood, 3 pc.
1 Chisel, 1/2"
1 Chisel, 3/8"
1 Chisel, 5/8"
1 Combination Wrench Ratcheting Set, SAE, 14 pc.
3 Continuity Tester
1 Cordless Drill, 18V, 1/2"
2 Countersink, 1/2"
1 Drill Bit Set, HSS, 15 pc.
1 Drill Stop Set
6 Electrician's Knife, Two-in-one
2 File Card & Brush, #20
8 File Handle, #0
2 File Set, Mini, 6 pc.
2 File, Mill, 2nd Cut, 10"
2 File, Mill, Bastard, 10"
2 File, Mill, Smooth, 10"
2 Hacksaw, 12"
1 Hammer, Ball Peen, 16 oz.
1 Hammer, Ball Peen, 24 oz.
2 Hammer, Graphite, 16 oz.
2 Hammer, Soft Face, 8 oz.
2 Hammer, Upholstery
1 Handsaw, 12TPI, 24"
1 Handsaw, 9PT, 20"
1 Hex Key Set, Fractional, 18 pc.
3 Hex Key, T-Handle, 6”, 8 pc.
1 Level, Aluminum, 24"
1 Mallet, Hickory, 12 oz.
1 Mallet, Rubber, 32 oz.
1 Mortise & Marking Gauge, 8"
4 Multi-Vise
4 Nail Set, 3 pc.
2 Nut Driver Set, SAE, 7 pc.
1 Oil Stone, 6" x 2" x 1"
2 Pin Punch, 1/8"
2 Pin Punch, 3/8"
1 Plane, Bench
1 Plane, Block
8 Pliers, Diagonal, 6"
8 Pliers, Lineman's, 8-1/2"
8 Pliers, Long Nose
1 Pliers, Tongue & Groove
2 Punch, Center, 5/32" x 5/16"
2 Punch, Center, 3/16" x 3/8"
2 Rasp, Cabinet, 10"
4 Rubber Sand Block
6 Rule, Steel, 12"
1 Saw, Jab, 6-1/4"
4 Scratch Awl
4 Screwdriver, Cabinet Tip, 3/16" x 3"
4 Screwdriver, Cabinet Tip, 3/16" x 6"
2 Screwdriver, Offset, #2 & 1/4"
3 Screwdriver, Phillips, #1 x 3"
2 Screwdriver, Phillips, #2 x 4"
2 Screwdriver, Phillips, #3 x 6"
2 Screwdriver, Phillips, #4 x 8"
8 Screwdriver, Standard Stubby, 1/4" x 1-1/2"
8 Screwdriver, Standard, 1/4" x 4"
3 Screwdriver, Standard, 3/8" x 8"
3 Screwdriver, Standard, 5/16" x 6"
1 Sliding T-Bevel, 10"
2 Snips, Straight, Compound Aviation
2 Snips, Tinner, 10"
3 Snips, Tinner, 7"
8 Soldering Gun, 260-200W
4 Soldering Iron, 175W
4 Soldering Iron, LED, 80W
2 Speedbor Bit Set, 6 pc.
1 Square, Combination Metric, 12"
1 Square, Steel Carpenter's, 12" x 1-1/2"
1 Tap & Die Set, SAE, 40 pc.
2 Terminal Kit, 175 pc.
2 Try Square, Bamboo, 8"
1 Wing Divider, 8"
3 Wiring Tool
4 Wrench, Adjustable, 4"
2 Wrench, Adjustable, 6"
2 Wrench, Adjustable, 8"

Includes
assorted pegboard hooks