Campbell Hausfeld GSD Angle Die Grinder, 20,000 RPM, with Flow Adjustment

Description

Angle Grinder boasts the power to handle grinding, porting, smoothing, polishing and deburring while making it easy to reach tight spaces. With a 20,000 free speed RPM and a .2 horsepower motor, the XT251000 moves material quickly and efficiently. An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done! The 1/4" collet makes this angle die grinder compatible with most standard bits. This die grinder boasts a lightweight composite design (1.1 lbs.), and a rubberized, comfort grip for a user friendly experience. Average air consumption of 2.8 CFM @ 90 PSI. Maximum pressure of 90 PSI. Air inlet size of 1/4" NPT (F). Minimum hose size of 3/8 inch. An air compressor with a tank gallon capacity of 20 gallons or larger is recommended.

• Grinder boasts a 20,000 free speed RPM and a .2 horsepower motor to move material quickly and efficiently
• Tackle grinding, porting, smoothing, polishing and deburring, even in hard to reach areas
• An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done
• Lightweight composite design (1.1 lbs.), and a rubberized, comfort grip for a user friendly experience

Air inlet: 1/4" NPT (F)
RPM: 20,000
Minimum hose: 3/8"
Horsepower: 0.2
Air consumption @ recommended pressure: 2.8 CFM @ 90 PSI
Collet: 1/4"
Size: 6-1/4"L x 1-5/8"H x 3-1/8"W
Weight: 1.1 lbs

Resources

• WARNING: This product can expose you to chemicals including lead which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.