Bosch Mastertech II J2534 VCI Diagnostic Tool

Description

Due to special pricing available exclusively to our school customers, this item is not available for purchase to our non-school customers at the price listed. Every effort will be made to sell this item at the lowest available price to our non-school customers. Please call us at (800) 831-5904 or email us at web@midwesttechnology.com.

The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications. It has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus.

Wired and Wireless capabilities
J2534-1 and J2534-2 Compliant
Validated to Ford, GM, FCA, Nissan/Infinity, Honda/Acura and Toyota/Lexus
Supports Right to Repair (R2R) initiatives
IP54 Environmentally Sealed

Wired: High speed USB 480 Mbps, Ethernet 10/100 Mbps
Wireless: WiFi USB stick 802.11b/g/n
Microprocessor: Intel MX6 Solo
Clock Speed: 800 MHz
RAM: 512 MB DDR3
ROM: 256 MB flash memory
LEDs: 4 status LEDs, 3 lighted buttons
Beeper: Signal tone
Power Supply: 7V – 32V, 750 mA, 5V, 0.5A
Operating Temperature: -4 °F – 158 °F
Storage Temperature: -4 °F – 176 °F
Humidity at 77°F: 30 % – 95 %
Maximum operating altitude: 13,123'
Protection not connected: IP 30
Protection connected: IP 54, Cat. 2
Cable: J1962 (ISO 15031-3): DLC 26-pin
Voltage resistance: 18V, Cat. 0
Size: 6.5" x 4.5" x 1.6"
Weight: 0.53 lbs.

Includes
WiFi Adapters (wireless PC to VCI)
J1962 Cable (connect to Vehicle)
USB Cable (connect to PC for firmware updates and setup)
Quick Start Guide

Resources

• WARNING: This product can expose you to chemicals including Di-isodecyl phthalate (DIDP) which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.