OSEPP 101 Arduino Basics Companion Kit

Description

Discover Arduino through easy and fun lessons with step-by-step instructions and diagrams. No prior electronics knowledge required. Kit comes with everything you need to build your own: Volt Meter, LED Game, Buzzer Circuit and play melody. OSEPP Uno R3 Plus Board not included, sold separately. You will need a UNO R3 Plus board, a mini USB to standard USB cable and Windows PC. The UNO R3 Plus board will be powered by your PC through the USB cable, so don’t need a power adapter.

• Tutorial 1: Loading the First Sketch
• Tutorial 2: Controlling Digital Outputs
• Tutorial 3: Using Digital Input
• Tutorial 4: An LED Game
• Tutorial 5: Building Voltage Meter
• Tutorial 6: Using Buzzer to Play a Melody
• Tutorial 7: Counting Down with a 7 Segment LED
• Tutorial 8: Powering the UNO R3 PLUS Using Batteries

Includes

1 x USB type A to mini-B, 6'
2 x Tact push switch 6mm x 6mm – through hole
1 x DIP switch 4 position – through hole
1 x 1Kohm potentiometer (variable resistor) – long pins
1 x 10Kohm potentiometer (variable resistor) – long pins
20 x 330 ohm axial resistor, 1/2W, 5%
5 x 1 kohm axial resistor, 1/2W, 5%
5 x 10kohm axial resistor, 1/2W, 5%
2 x LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA
2 x LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA
2 x LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA
2 x LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA
2 x LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA
2 x Two digits 7-segment LED – RED
1 x Buzzer, 5Vo-p
2 x NPN transistor
1 x Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND)
40 x Ribbon Jumper Cables
1 x 9 Volt Battery Connector
2 x 2cm x 2cm x 3mm thick double side tape
1 x Information sheet – Arduino UNO diagram + basic electronic theory
1 x Kit container