LulzBot TAZ Dual Extruder V3 Tool Head

(No reviews yet) Write a Review
M510740 KT-CP0127

Frequently Bought Together

Please choose Options for all selected Products

Take your designs to the next level with the all-new LulzBot TAZ Dual Extruder v3 Tool Head. This tool head was engineered to utilize dedicated support material, including soluble filament, like PVA, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.

The Dual Extruder v3 does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?

The LulzBot TAZ Dual Extruder v3 was engineered with a focus on printing with dedicated support materials. The Dual Extruder v3 enables 3D printing complex geometry that previously would have required time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.

The Dual Extruder v3 features a unibody heatsink with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing.

The Dual Extruder v3 comes with everything you need to install on your LulzBot TAZ 6, including an extra wide wiper pad mount that enables your Dual Extruder v3 to work flawlessly with LulzBot self-cleaning and self-leveling technology.

Works with: LulzBot TAZ 6, LulzBot TAZ 5

Required filament diameter: 2.85mm diameter
Hot end temperature range: 120°C - 300°C
Nozzle diameters: 0.5mm
Required power system: 24 Volts
Fans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling
Weight: 0.96 kg (2.11 lbs.)

LulzBot TAZ Dual Extruder Tool Head v3 (Fully Assembled)
3D Printed Z-axis endstop extension mount
Machined Z-axis Endstop Extension
Dual v3 wiper mount
Additional spool arm
Feed tube spinner
T-nut holder jig
Idler jig
4 Zip ties
2 Extension harnesses
M5 washer (Black)
M5 x 14 socket head cap screw
Filament Feed tube
Sample length of Polylite PLA
Sample length of PolyDissolve S1

Videos Hide Videos Show Videos