Festool 6-1/4" Plunge Cut Track Saw TS 55 REQ-F-Plus-FS

SKU: M404644 576012
Write a Review
M404644 576012
Di(2-ethylhexyl)phthalate (DEHP)

Frequently Bought Together

Please choose options for all selected products


The TS REQ is not your standard circular saw. With its accuracy and versatility, a better comparison would be to the most advanced table saws, miter saws or panel saws available. Its incredible portability and unbelievable ease of use gives you a precision-cutting solution like no other at home, in the highest-end cabinet shop, or an onsite remodel. With the addition of micro-adjustable depth controls and a flat housing for flush-cutting against walls or adjacent surfaces, the TS 55 REQ is our most advanced plunge cut saw ever, which is saying a lot.


  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts
  • Spring-loaded riving knife keeps the cut kerf open so that the material does not pinch the blade
  • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal

Guide rail precision
A perfect cut the first time, every time, with laser-straight, splinter-free cuts.

Scribe Line = Cut Line
The TS 55 makes the actual cut right on the edge of the scribe line, even on bevel cuts.

Plunge Cut Action
Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.

Riving knife
Integrated spring-loaded riving knife keeps the cut kerf open and the material away from the rear of the blade, reducing the chance of kickback and leaving the user in control.

MMC Electronics
Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.

Rotating Dust Port
Direct dust away from the saw, user, and the material or connect it to a Festool CT dust extractor for tool-triggered dust capture.

FastFix Blade Changing System
Blade changes are easier and faster using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.

Triple Motor Bearing
The triple motor bearing improves the smoothness of cutting action and extends the service life of the tool.

Zero-tearout cutting
With the Guide Rail Splinterguard and an integrated, replaceable Splinterguard on the TS, you’ll get zero-tearout cuts, reducing rework and material waste.

System efficiency
Do more with less. Less equipment, less space, and less time with the Festool System.

Micro-adjustable depth controls
Micro-adjustable depth indicator features two cursor lines, for precise material processing on or off the Guide Rail. (TS 55 REQ only.)

With two available sizes and over 13 blade types available, TS saws can handle nearly any surface providing optimum results.

Guide rail precision
A perfect cut the first time, every time, with laser-straight, splinter-free cuts.


Blade diameter: 6-1/4"
Voltage: 120
Power consumption: 1,200W
Speed: 2,000 - 5,800 RPM
Cutting depth at 45°: 1-11/16"
Cutting depth at 0°: 0-2-1/8"
Angular range: -1° - 47°
Dust extraction connection dia.: 1-1/16"/1-7/16"
Weight: 9.92 lbs.

What's in the box

fine-tooth saw blade HW W48
55" guide rail FS 1400
Sight window
Hex key WAF 5
Systainer SYS3 M 337.


  • California Residents
  • WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.