Loading... Please wait...

Our Newsletter


Sort by:

Welding Tools

Next »
  • Pages:
  • 1
  • 2
  • 3
  • 5-Piece Welders File Set with Brush 543844 MWF-2
    $72.00 5-Piece Welders File Set with Brush 543844 MWF-2
    Nicholson   These files will cut steel, wood, plastics, leather & rubber. Includes Two 12" half round bastard files Wire brush Two 10" mill bastard files 12" flat bastard...

  • All-purpose Brazing Flux 942870 30018
    $6.09 All-purpose Brazing Flux 942870 30018
    Forney   For use w/oxy-acetylene or arc torch, in the general brazing of steel, malleable iron, cast iron & galvanized metals. Also use when fusion welding copper, brass, bronze & other copper alloys. Cleanses the...

  • Chipping Hammer Brush Refill 969323 44070
    $4.03 Chipping Hammer Brush Refill 969323 44070
    Forney   Sturdy, high quality steel wire brush. Replacement brush for 70500 chipping hammer.

  • Chipping Hammer w/Brush 409950 70500
    $9.98 Chipping Hammer w/Brush 409950 70500
    Forney   Impact resistant handle & steel wire brush for cleaning. Tempered chisel to resist dulling during heavy duty usage. Brush is removable, reversible & replaceable. Loop in handle for belt hook. 12"...

  • Cylinder Trucks 618710 150-15
    $252.00 Cylinder Trucks 618710 150-15
    Harper   Continuous handle model safely transports a 7-1/2" oxygen & 9-1/4" acetylene cylinder combination. Semi-pneumatic rubber tires w/smooth operating ball bearings.Bracket chain 24"H. Base plate 9" x 18"...

  • Cylinder Trucks 618711 150-25
    $271.00 Cylinder Trucks 618711 150-25
    Harper   Continuous handle model safely transports a 7-1/2" oxygen & 9-1/4" acetylene cylinder combination. Semi-pneumatic rubber tires w/smooth operating ball bearings.Bracket chain 24"H. Base plate 9" x 18"...

  • Electrode Holder 942895 56200
    $21.90 Electrode Holder 942895 56200
    Forney   Heavy-duty 300 Amp electrode holder for most arc welding jobs. Accommodates rods 3/32" to 3/16" diameter. Will accept up to #2 welding cable. 10-1/2" length.

  • Flat File Lighter 795098 1501
    $2.11 Flat File Lighter 795098 1501
    Shurlite   Constructed using a round cup design. Allows user to replace the flint when necessary.USA made.

  • Flat Soapstone 405630 1423-0095
    $4.22 Flat Soapstone 405630 1423-0095
    Firepower   Chalk for marking metal.5"L x 1/2"W x 3/16" thick. 6/pkg.Shown with holder, sold separately.

  • Flat Soapstone Holder 405632 1423-0097
    $3.64 Flat Soapstone Holder 405632 1423-0097
    Firepower   Use with flat soapstone 1423-0095.Shown with soapstone, sold separately.

  • Flint Renewals 795102 3011X
    $1.44 Flint Renewals 795102 3011X
    Shurlite   USA made.For Mfg. 3001. 5/pkg.

  • Flint Renewals 795115 5012X
    $3.35 Flint Renewals 795115 5012X
    Shurlite   USA made.For Mfg. 4501. 4/pkg.

  • Forney Magnetic Holding Clamp, 3-1/4"H x 4-3/4"W 409981 70716
    $5.72 Forney Magnetic Holding Clamp, 3-1/4"H x 4-3/4"W 409981 70716
    Forney  Multi-purpose magnet holds sheets & tubes at 45°, 90° & 135° angles freeing up welder's hands. 1" thick.

  • Forney Magnetic Holding Clamp, 4-13/16"H x 7-1/2"W 409980 70715
    $10.80 Forney Magnetic Holding Clamp, 4-13/16"H x 7-1/2"W 409980 70715
    Forney  Multi-purpose magnet holds sheets & tubes at 45°, 90° & 135° angles freeing up welder's hands. 1" thick.

  • Hold-down Clamp 192110 1623
    $19.30 Hold-down Clamp 192110 1623
    Jorgensen   Hold-down clamp offers the advantage of bench top and machine "surface" clamping. Designed to rotate 360° around the holding bolt. Use anywhere on wood or metal surfaces. Opening Capacity:...

  • Hold-down Clamp, w/Shielded Screw 192111 1623-S
    $48.00 Hold-down Clamp, w/Shielded Screw 192111 1623-S
    Jorgensen   Clamps are not limited to locations near the bench edge. On bench tops, a countersunk hole is bored to accommodate the bolt that engages the clamp frame. Work surface is free from obstruction when the...

  • Jorgenson Deep Throat Body C-Clamp, 6" 191885 126
    $31.70 Jorgenson Deep Throat Body C-Clamp, 6" 191885 126
    Jorgenson  Deep throat, general-purpose "C" clamps for regular-duty industrial service. High strength-to-weight ratio. Unique, rounded frame design allows clearance at top, back and bottom of work being held. Longer...

  • Jorgenson Deep Throat Body C-Clamp, 8" 191887 128
    $47.00 Jorgenson Deep Throat Body C-Clamp, 8" 191887 128
    Jorgenson  Deep throat, general-purpose "C" clamps for regular-duty industrial service. High strength-to-weight ratio. Unique, rounded frame design allows clearance at top, back and bottom of work being held. Longer...

  • Jorgenson Shielded Welder's C-Clamp, 5-3/4" 191884 126-S
    $65.50 Jorgenson Shielded Welder's C-Clamp, 5-3/4" 191884 126-S
    Jorgensen   General purpose clamp for medium-duty industrial welding use. Deep throat has a unique rounded frame for work clearance at top, back and bottom. Steel shield protects threads from welding spatter...

  • Jorgenson Shielded Welder's C-Clamp, 7-5/8" 191888 128-S
    $82.00 Jorgenson Shielded Welder's C-Clamp, 7-5/8" 191888 128-S
    Jorgensen   General purpose clamp for medium-duty industrial welding use. Deep throat has a unique rounded frame for work clearance at top, back and bottom. Steel shield protects threads from welding spatter...

  • Locking C-Clamps 310632 C6CCV
    $12.20 Locking C-Clamps 310632 C6CCV
    Crescent   Rust resistant, nickel-plated finish. Maximum jaw opening meets ASME standards. Precisely machined ferrule for fine jaw adjustment. Powerful, non-slip compound locking grip allows easy positioning of...

  • Locking C-Clamps 310633 C6CCSV
    $13.20 Locking C-Clamps 310633 C6CCSV
    Crescent   Rust resistant, nickel-plated finish. Maximum jaw opening meets ASME standards. Precisely machined ferrule for fine jaw adjustment. Powerful, non-slip compound locking grip allows easy positioning of...

  • Locking C-Clamps 310634 C11CCV
    $19.30 Locking C-Clamps 310634 C11CCV
    Crescent   Rust resistant, nickel-plated finish. Maximum jaw opening meets ASME standards. Precisely machined ferrule for fine jaw adjustment. Powerful, non-slip compound locking grip allows easy positioning of...

  • Locking C-Clamps 310635 C11CCSV
    $21.00 Locking C-Clamps 310635 C11CCSV
    Crescent   Rust resistant, nickel-plated finish. Maximum jaw opening meets ASME standards. Precisely machined ferrule for fine jaw adjustment. Powerful, non-slip compound locking grip allows easy positioning of...

  • Locking C-Clamps 310637 C9W
    $21.60 Locking C-Clamps 310637 C9W
    Crescent   Rust resistant, nickel-plated finish. Maximum jaw opening meets ASME standards. Precisely machined ferrule for fine jaw adjustment. Powerful, non-slip compound locking grip allows easy positioning of...


Next »
  • Pages:
  • 1
  • 2
  • 3